Keurig 800.427.1704 Coffee Maker Manual

The Keurig 800.427.1704 is a single-serve coffee maker designed for convenience and ease of use. It features a sleek design, a large water reservoir, and compatibility with a variety of K-Cup pods. This manual provides essential information on safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Coffee 7. Cleaning and Maintenance 8. Troubleshooting 9. Customer Support

Features at a Glance

Key components: Large water reservoir, brew strength control, programmable settings, and a removable drip tray for easy cleaning.

Feature	Description
Large Water Reservoir	Holds enough water for multiple brews without refilling.
Brew Strength Control	Allows you to customize the strength of your coffee.
Programmable Settings	Set your coffee maker to brew at specific times.
Removable Drip Tray	Facilitates easy cleaning and accommodates travel mugs.
Auto Shut-Off	Turns off the machine after a period of inactivity.

Installation

Unpack the coffee maker and place it on a flat, stable surface. Ensure there is adequate space around the machine for ventilation.

Remove all packaging materials.
Place the water reservoir in its designated position.
Plug the coffee maker into a grounded outlet.

WARNING! Ensure the coffee maker is placed away from heat sources and direct sunlight.

First-Time Setup

Fill the water reservoir with fresh water and run a cleansing brew without a K-Cup to prepare the machine.

Fill the reservoir to the maximum fill line.
Press the power button to turn on the coffee maker.
Select the brew size and press the brew button.

CAUTION! Do not use hot water in the reservoir; only use cold, fresh water.

Specifications

Model: Keurig 800.427.1704.
Power: 120V, 60Hz.
Water Reservoir Capacity: 48 ounces.
Brew Sizes: 6, 8, 10, and 12 ounces.
Weight: Approximately 10 pounds.

Controls and Settings

The coffee maker features a simple control panel with buttons for power, brew size selection, and brew strength adjustment.

Display: LED indicators for brew status and alerts.

Brewing Coffee

To brew coffee, insert a K-Cup pod into the holder, close the lid, and select your desired brew size.

Fill the water reservoir if necessary.
Insert a K-Cup pod into the holder.
Select the brew size and press the brew button.
Enjoy your freshly brewed coffee!

WARNING! Do not open the lid while brewing; hot water and steam may escape.

Cleaning and Maintenance

Regular cleaning is essential for optimal performance. Clean the water reservoir and drip tray regularly.

CAUTION! Unplug the coffee maker before cleaning. Do not immerse the machine in water.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unplugged or faulty outlet	Check power connection and outlet.
Weak coffee	Old K-Cup or incorrect brew size	Use fresh K-Cup and select appropriate size.
Water not heating	Blocked water line	Run a cleansing brew to clear the line.
Machine not brewing	Clogged needle	Clean the needle with a paperclip.

Service: For further assistance, contact customer support.

Customer Support

For support, visit www.keurig.com or contact 1-800-423-2443 for assistance with your Keurig coffee maker.